一、施工準備

1、 Construction preparation

設計圖紙和施工圖紙:確保施工團隊充分理解圖紙，明確風管的規格、尺寸和安裝位置。

Design and construction drawings: Ensure that the construction team fully understands the drawings, clarifies the specifications, dimensions, and installation positions of the air ducts.

工具和材料:確保所有必要的工具和材料都已準備就緒，包括纖維織物風管、連接器、固定件、螺絲刀、切割工具等。

Tools and Materials: Ensure that all necessary tools and materials are ready, including fiber fabric ducts, connectors, fasteners, screwdrivers, cutting tools, etc.

施工現場:確保施工現場干凈、整潔，并且有足夠的空間進行風管安裝。

Construction site: Ensure that the construction site is clean, tidy, and has sufficient space for air duct installation.

二、基礎制作

2、 Basic production

根據施工圖紙，制作風管安裝的基礎?；A(chǔ)應堅固、平整，能夠支撐風管并防止其移動。

According to the construction drawings, make the foundation for the installation of air ducts. The foundation should be sturdy and flat, able to support the air duct and prevent its movement.

制作過程中，要確?；A(chǔ)的尺寸和位置準確，以避免安裝時出現問題。

During the production process, it is important to ensure that the dimensions and positions of the foundation are accurate to avoid installation issues.

三、風管安裝

3、 Installation of air ducts

核對風管的規格和尺寸，確保與施工圖紙一致。

Verify the specifications and dimensions of the air duct to ensure consistency with the construction drawings.

按照圖紙要求，將風管安裝在基礎上。確保風管安裝平直，無明顯彎曲或扭曲。

Install the air duct on the foundation according to the drawing requirements. Ensure that the air duct is installed straight and without obvious bending or twisting.

在安裝過程中，要保護好風管，避免其受到損壞或污染。

During the installation process, the air duct should be protected to avoid damage or contamination.

四、連接與固定

4、 Connection and fixation

使用適當?shù)倪B接器將風管連接在一起。確保連接器緊固，不會漏氣。

Connect the air ducts together using appropriate connectors. Ensure that the connector is tight and does not leak air.

根據需要，使用固定件將風管固定在基礎上。固定件應安裝在適當?shù)奈恢茫员苊怙L(fēng)管移動或扭曲。

As needed, use fasteners to secure the air duct to the foundation. Fixtures should be installed in appropriate positions to avoid movement or distortion of the duct.

在連接和固定過程中，要確保風管的密封性，以避免漏氣現象。

During the connection and fixation process, it is necessary to ensure the sealing of the air duct to avoid air leakage.

五、風口安裝

5、 Installation of air vents

根據施工圖紙，確定風口的位置和尺寸。

Determine the position and size of the air vent according to the construction drawings.

將風口安裝在風管上，確保其位置準確、牢固。

Install the air vent on the air duct to ensure its accurate and secure position.

安裝過程中，要保證風口清潔，避免灰塵或雜物進入風管。

During the installation process, it is important to ensure that the air outlet is clean and to prevent dust or debris from entering the air duct.

六、清潔與檢驗

6、 Cleaning and Inspection

在安裝完成后，使用適當?shù)那鍧崉┖蛣┣鍧嶏L(fēng)管和風口。確保風管內部和外部都得到清潔。

After installation, use appropriate cleaning agents and disinfectants to clean the air ducts and vents. Ensure that both the inside and outside of the air duct are clean.

清潔后，進行漏氣檢驗。使用漏氣檢測儀對風管進行檢測，確保其密封性良好。

After cleaning, perform a leak test. Use a leak detector to test the air duct and ensure its good sealing.

如果發現漏氣現象，應立即進行修復，并重新進行檢測直合格。

If air leakage is found, it should be repaired immediately and retested until it is qualified.

七、交付使用

7、 Delivery for use

在完成所有安裝和檢驗工作后，進行后的檢查，確保風管系統工作正常。

After completing all installation and inspection work, conduct a post inspection to ensure that the air duct system is working properly.

將所有工具和剩余的材料整理好，并清理施工現場。

Organize all tools and remaining materials and clean the construction site.

向客戶或相關部門提交驗收報告，并交付使用說明。

Submit an acceptance report to the customer or relevant department and provide instructions for use.

本文由山東通風管道加工整理發布，您是不是對這些內容有所了解了呢?更多的內容請點擊:http://www.cdxysh.cn   我們會有更多精彩內容等你查看。

This article is organized and published by Shandong Ventilation Pipeline Processing. Do you have any understanding of these contents? For more information, please click on: http://www.cdxysh.cn We will have more exciting content waiting for you to check out.

上一篇：不銹鋼通風管道的保養工作要注意什么？
下一篇：通風管道會翹曲變形的原因是什么？